How To Pair DZ09, Q18, A1, GT08, U80 SmartPhone SmartWatch Smart Watch Phone Android iPhone Review

How To Pair DZ09, Q18, A1, GT08, U80 SmartPhone SmartWatch Smart Watch Phone Android iPhone Review

This video is the basics on how to connect your cheap smart watch to your phone, i have other smartwatch unboxing videos,
Q18 https://youtu.be/wl3S_Zmi9cs
GT08 https://youtu.be/VKepTKURoRs
A1 https://youtu.be/wY0IZYrrL0A
DZ09 https://youtu.be/sBvMke-T_qg

Here are the basics,

NEVER use the QR code which links to an app on the watch as it links to a unknown source on the internet,

This video shows you how to use the app called,

Mediatek Smart Device,

Why this one ?,

Most of these cheap watches have a Mediatek chip in them so i stopped searching after i found this app worked as well as i needed it to,

The following is how it was on the video,

Sorry for the CAPS this is how i do my scripts for these videos,

NOT ALL FUNCTIONS ARE SUPPORTED ON THESE WATCHES IF YOU HAVE AN iPhone,

THE APP I USE IS CALLED MEDIATEK SMART DEVICE,

IT’S AVAILABLE IN THE GOOGLE PLAY STORE,

IT SHOULD WORK WITH ALL THESE CHEAP SMART WATCHES,

BUT WORKS BEST WITH THE SMART WATCHES THAT HAVE THE MEDIATEK CHIP INSIDE THEM,

IF THIS APP DOESN’T WORK,

THERE ARE 2 OTHER APPS AVAILABLE IN THE GOOGLE PLAY STORE,

ONE IS CALLED BT NOTIFICATION,

AND THE OTHER CALLED SMARTWATCH HELPER,

GOOGLE PLAY STORE IS MUCH SAFER,

SO GET THE RIGHT APP,

INSTALL IT ON YOUR PHONE,

First connection of the smartwatch to your smartphone,

TURN ON THE BLUETOOTH ON YOUR PHONE,

BOTH THE SCREENS ON THE WATCH AND PHONE NEED TO BE ON DURING ANY CONNECTION ATTEMPT,

IF EITHER IS OFF THEY WILL NOT CONNECT AND YOU ARE WASTING YOUR TIME,

OPEN THE MEDIATEK SMART DEVICE ON YOUR PHONE,

NOW AFTER MANY ATTEMPTS I FOUND THIS TO BE THE EASIEST WAY TO CONNECT THE WATCH,

ONLY EVER CONNECT THE WATCH TO THE PHONE,

NEVER THE OTHER WAY AROUND,

ALWAYS TURN ON YOUR BLUE TOOTH ON YOUR PHONE FIRST,

But for the first attempt,

LEAVE THE SMARTPHONES BLUETOOTH OFF FOR NOW,

GO INTO BLUETOOTH SETTINGS IN YOUR WATCH,

AND SWITCH ON BOTH THE BLUETOOTH AND THE BLUETOOTH VISABILITY ON THE WATCH,

THEN SELECT MY DEVICE IN THE BLUETOOTH SETTINGS,

I AM DOING THIS ON MY Q18,

MENU SETTINGS MAY BE SLIGHTLY DIFFERENT ON OTHER WATCHES,

NOW GO DOWN TO MY DEVICE,

CLICK IT,

IT SHOULD GIVE YOU AN OPTION TO SEARCH NEW DEVICE,

NOW TURN ON YOUR PHONES BLUE TOOTH,

IT NEEDS TO BE DONE THIS WAY FOR THE FIRST CONNECTION,

ONCE YOUR PHONE IS STORED IN THE WATCH ALWAYS MAKE SURE THE PHONES BLUETOOTH IS ON BEFORE YOU SWITCH ON THE WATCH,

AS THE WATCH AUTO DETECTS SECONDS AFTER SWITCHING ON AND WON’T FIND YOUR PHONE UNLESS BLUETOOTH IS ON,

THE PHONES SCREEN ALWAYS HAS TO BE ON WHILE THE WATCH CONNECTS TO THE PHONE,

NOW CLICK SEARCH NEW DEVICE ON THE WATCH OPTIONS,

MAKE SURE THAT THE WATCH AND PHONE ARE NEXT TO EACH OTHER WHILE IT SEARCHES,

IT SHOULD THEN SAY ON THE WATCH PAIR DEVICE,

YOUR PHONE SHOULD GET A POP UP NOTIFICATION SAYING PAIR A DEVICE,

CHOOSE THE YES ON YOUR PHONE, IT MAY GIVE YOU A PAIR CODE,

MY WATCH DIDN’T NEED THE CODE INPUTTING,

THE WATCH WILL NOW ASK IF YOU WANT TO SYNC TIME & DATE,

SELECT YES,

SO YOU SHOULD NEVER NEED TO MANUALLY SET THE TIME,

UNLESS YOU WANT TO USE THE WATCH AS A STAND ALONE PHONE WITHOUT A CONNECTION TO YOUR SMARTPHONE,

TO DOUBLE CHECK THE WATCH IS CONNECTED,

THE MEDIATEK SMART DEVICE APP SHOULD SAY “CONNECTED”,

SO THAT IS THE MAIN FIRST SETUP OF THE WATCH,

NEXT GO INTO YOU NOTIFICATIONS AND SELECT THE PERSONAL APPS AND THE SYSTEM APPS YOU WANT TO BE PUSHED ONTO THE WATCH,

SOMETIMES THIS APP IF CLOSED RESETS ALL THE NOTIFICATIONS BACK TO NOTIFY ALL,

BUT SINCE I LOCKED THE APP IN MY PHONE IT NOW REMEMBERS THE SETTINGS,

IF I HAVE TO CLOSE THE APP AND RE OPEN IT,

THE LOCKING OFF THE APP IS DONE IN THE MULTIPLE APPS OPEN SCREEN,

JUST SLIDE DOWN THE APP AND IT LOCKS IT,

SLIDE IT BACK DOWN AND IT UNLOCKS IT,

IF THE WATCH AND PHONE ARE SEPERATED BY MORE THAN 5 TO 7 METRES THE WATCH WILL DIS CONNECT FROM THE PHONE,

IF YOU WANT TO CHECK THE CONNECTION LOOK IN THE MEDIATEK SMART DEVICE IF IT SAYS CONNECTED IT IS CONNECTED,

ALSO LOOK IN THE BLUETOOTH SETTINGS IN THE WATCH UNDER MY DEVICE AND THE LITTLE ANTENNA SYMBOL SHOULD BE NEXT TO THE PHONES NAME,

IF NOT GO INTO “MY DEVICE” IN THE BLUETOOTH SETTINGS TAP THE DEVICES NAME AND PRESS DIS CONNECT,

THEN MAKE SURE THE WATCHES BLUETOOTH VISABILITY IS ON,

AND THE PHONE BLUETOOTH IS ON BEFORE YOU ATTEMPT THE RECONNECTION AS THE WATCHES BLUETOOTH VISABILITY SWITCHES OFF AUTOMATTICALLY,

THEN SELECT CONNECT ON THE MY DEVICE OPTION FOR THE DEVICE YOU WISH TO CONNECT TO,

WHILE THE CONNECTION IS MADE MAKE SURE THE WATCH AND PHONE ARE CLOSE TOGETHER,

IT WILL THEM SAY ON THE APP CONNECTED.

The daily connection part of the video is pinned to the top of the comments below.

If you found this lesson helpful, please share the How To Pair DZ09, Q18, A1, GT08, U80 SmartPhone SmartWatch Smart Watch Phone Android iPhone Review video on Facebook…